Updated at: 11-08-2022 - By: Jane Brody

A bird feeder can be hung from a fence in the same way that a bird house can, provided there are no predators in the area.

Attaching a bird feeder to a fence is as simple as attaching a metal bracket to the fence and hooking it over a fence post or anywhere along the fence panel. On the one hand, you can use a metal bracket that is permanently attached to the post, while on the other, you can use a homemade wooden bracket.

Bird Feeder For Fence

You’ll need a bracket to create at least a foot of space between the bird feeder and the fence post if you plan to hang it from your own or a neighbor’s fence that separates the two backyards.

Placing a bird feeder close against the fence provides added stability, especially for bigger birds.

The outcome may be a tipped bird feeder, which would waste food if it fell over unless it was properly hung.

When there aren’t any nearby trees or plants, it’s a good idea to hang a bird feeder on the fence, but before I go any further, you should know that there are safer alternatives.

If you want to hang a bird feeder but don’t have anywhere secure to do so, you can use the eaves of your roof to do so (the soffit is hidden from view), or you can install a gutter bracket for the purpose.

If a bird feeder is hung too low on a fence, for example, it poses a hazard to passers-by, despite the fact that bird feeders themselves pose no danger.

However, a bird feeder can still be extremely secure if it is hung from a sturdy fence post with a concrete base rather than a flimsy fence panel.

Rules for attracting wild birds to a bird feeder, even if it is now hung on a fence, still apply, such as making sure the feeder is positioned in the sun or remains in a sun lit area; feeders located in the inconspicuous shadows are often ignored by passing birds.

Hook over hanger

Bird Feeder For Fence-3

Using a removable bird feeder bracket that slots over the fence post or panel is the easiest way to hang a bird feeder on a fence.

What you get is an iron or steel bracket that looks like it’s screwed into the fence, but can be easily removed by lifting it off the top of the fence.

This type of bracket is ideal for hanging bird feeders on a fence since it allows you to easily move the feeders to a new location along the fence if one part isn’t working properly.

A good example of this removable fence bracket, which is primarily offered in the UK but can be sold in the USA as well, can be found on folksy.com.

The metal bracket is held in place at the bottom by a cross bar, as seen in the product pictures, and the bracket itself just hangs over the fence panel.

Without this cross section, the bracket would tip to one side or the other, therefore attaching a broader metal piece to the bottom section helps maintain stability.

Find this product on Amazon.co.uk to attach a removable bracket on a concrete or metal fence post that is slightly broader than a panel.

All the advantages of a metal bracket attached to a fence with screws are present, but with this type, the bracket may be moved or removed without any hassle.

You could also use the tightening bolt as a mount for a deck-mounted bird bath and feeder, if you have one.

Install metal bracket

The use of a removable metal bracket that may be moved to any point along a fence panel or hung from a fence post is unnecessary.

The conventional method for hanging bird feeders from a fence involves attaching a metal bracket to the fence post and using the bracket’s end arm as a hook to suspend the feeder.

You can choose a bracket made of wrought iron or another type of metal to match your garden’s aesthetic, while a black bracket will blend in with any landscape.

The metal bracket needs to be screwed as high up the fence post as possible to give you a comfortable working height of 4 to 6 feet.

The problem with bird feeders hung from a standard backyard fence is that the feeder’s perch will likely be too low to the ground, as most of these fences are only 6 feet in height.

For those fortunate enough to not have to deal with cats or squirrels, a bird feeder hung from a fence can be placed in a convenient location.

The bracket’s included hardware must be used to screw deeply into the fence post, making it appropriate for hanging large bird feeders, while the fence penal remains too frail and thin for such a task.

Build a wooden hanger

Bird Feeder For Fence-2

If you want to attach something substantial to a fence post, you can create your own metal bracket instead of buying one.

If you’re handy with a saw, you can fashion a one-of-a-kind wooden bracket in no time at all.

If you want your bracket to look well on your fence, you should make it out of wood.

Simply put, it’s easy to alter its color with paint or stain, so it’ll go in perfectly with your wooden fence.

If you’re not handy with a saw, then your best bet is to visit a garden center in search of a wooden bracket for flower baskets. You only need the bracket to screw onto your fence, so skip the flower container.

There are advantages to constructing a wooden bird feeder bracket in your own backyard or workshop, such as the ability to address problems not encountered with commercially available metal brackets.

Since you’re probably making the bracket yourself, it makes sense to use as much of the back panel as possible while attaching it.

If you hang the feeder from the ceiling, it will be out of the reach of any ground-dwelling bugs or pets.

The bracket that holds the bird feeder up from the bottom and is stretched horizontally can be extended in the same way. The reason you would want to increase its length is to create a buffer zone around the suspended feeder and the fence.

Prioritize fence post over panel

Common backyard pests, such as your own dogs or strays that wander in throughout the day, present a number of potential safety concerns.

The location of the bird feeder on the fence is something that you may have overlooked up until now. Furthermore, a single bird feeder can be fixed to a bracket on the fence, so you may want to consider clustering multiple feeders together.

Because birds can see a wide feeding area from above or while taking a break in your yard, they are more likely to discover your bird feeders if they are near together.

Permit me to stray slightly from the topic at hand in order to provide some light on whether or not bird feeders are better suited for mounting on fence posts or panels.

Panels are the roughly 6-foot-long parts that sit in between the fence posts, which are often set into the ground with a concrete base.

A fence post is the most stable part of a fence, so that’s where you should hang your bird feeder.

Heavy bird feeders can stress and eventually break thinner fence panels, which are typically changed every several years.

Fencing stays there because it is supported by sturdy fence pillars.

Not only do bird feeders require a fence post section, but so does hanging a bird house or a large soil-filled flower planter.

Dangers on other side of fence

Bird feeders hung near a fence may not always be the greatest idea, as cats from nearby houses may be able to reach them, and other animals, from squirrels and chipmunks to bears and coyotes, may find other ways into your yard.

Now picture a bird feeder hung no more than four feet from a fence post, where it is sure to attract these and other unwanted pests.

Bird feeders should be hung high up since they serve primarily as a deterrent against animals that would otherwise quickly empty the feeder.

Cats, whether owned by a neighbor or a stray, will murder wild birds for fun, making them far more dangerous than any pest wild animal.

If a bird feeder is hanging from a standard-sized backyard fence, I can assure you that cats will find their way to it.

Disease can be contracted via ingestion of bird feeder food by cats or other pets, including dogs.

Cats will position themselves so that they can pounce on any wild birds that happen to wander into the yard because they were drawn to the bird feeder hanging from the fence.

Similarly, if you hang a bird feeder anyplace along the fence, it creates a blind spot behind the panels where cats can sneak in from your neighbor’s yard or the public right-of-way.

Summary

One bird feeder at a time can be hung from a metal bracket that is either removable or permanently mounted to the fence post.

When you can’t screw a bracket onto a wooden fence post (as some fence posts are constructed of metal or concrete), you’ll need to rely on a removable bracket that can be hung over the fence post or panel.

Either method is OK, however mounting a metal bracket on a fence post can be inconvenient if the birds don’t discover it. If that happens, you’ll have to unscrew the bracket and transfer it to a new location, which is inconvenient.

Detachable brackets are designed to be hooked over the top of the fence, providing a stable attachment to the fence panel or post.

An individual who is handy with tools and enjoys woodworking can easily make a wooden bracket to hang bird feeders in place of a metal one.

If you create your own wooden bracket taller and give it a longer bracket arm, you can put the bird feeder much farther from the ground and give it more clearance.

You should be aware that there may be predators on the other side of the fence, such as a cat waiting to pounce on your birds while you feed them.

Mounting squirrel or pest deterrents on a feeder hung from a fence will not be effective enough to prevent squirrels or pests from eating the seed or birdseed in the feeder.

If you can’t secure a bird feeder to a fence using a bracket to keep it out of the reach of pests and pets, you’ll need to relocate the feeder.

Rate this post